G8145WRT1A05 Impeller is for 10/8 AH Slurry Pumps, The Slurry Pump Impeller G8145WRT1A05 and throatbush G8083WRT1A05 combination is a superior upgrade for your existing 10/8 AH Slurry Pumps
Slurry Pump WRT impeller and throatbush combination with improved hydraulic profiles, reduced turbulence, extended wear performance and lowered power consumption.
WRT Slurry Pump Impeller design
The five vane impellers in the AH slurry pump range were for many years considered to be the industry 'standard'. However, in order to improve upon one or more of the performance parameters, Weir Minerals started out by using a range of 4 vane impellers developed for the slurry pumps.The latest WRT impeller designs maintain the four vane’s advantages, but improved on all of the performance parameters - efficiency, wear and cavitation performance by improving the fluid guidance through the impeller with streamlined main pumping vanes, streamlined inlet as well as vanelets at the impeller outlet. Due to these improvements in performance, the WRT impellers represent a step change improvement compared to the older style five vane impeller design.
Slurry Pump WRT parts is interchangeable with all standard AH slurry pumps
WRT Slurry Pump Impeller Part No. |
Standard Slurry Pump impeller Part No. |
D3145WRT1A05 |
D3147A05 |
E4147A05 |
|
E4145WRT1BFA05 |
E4147BFA05 |
F6145WRT1A05 |
|
F6145WRT1BFA05 |
F6147BFA05 |
FAM8145WRT1A05 |
FAM8147A05 |
FAM8145WRT1BFA05 |
FAM8147BFA05 |
G8145WRT1A05 |
G8147A05 |
G8145WRT1BFA05 |
G8147BFA05 |
FAM10147A05 |
|
G10145WRT1A05 |
G10147A05 |
G12145WRT1A05 |
Updated AH Slurry Pumps Applications:
The AH series centrifugal horizontal slurry Pump is used for highly abrasive/density slurries in processes from cyclone feed to regrind, mill discharge, flotation, mine drainage and tailing in minerals plants plus other industrial applications, Sometimes, it could also be used in dredging of settling lagoons and pumping of drilling mud etc
• Mining • Mineral processing • Construction • Chemical and Fertilization • Power generation |
• Phosphate matrix fertilization • Pulp and paper • Waste sludge • Paper mill wastes and liquors • Precipitated CaCO3 |
• Plaster • Bottom/fly ash, lime grinding • Dirty water • Pulp and paper • Oil and gas |
• Waste water treatment • Rod mill discharge • SAG mill discharge • Fine tailing |
• Flotation • Heavy media process • Minerals concentrate • Mineral sands • Coal-washing plant |
• Coarse tailing • Dredging • FGD • Wet crushers applications |
• Wet scrubber systems • Process chemical • Iron and Steel • Ni acid slurry • Fracking slurries |
• Clay and sand slurries • Kaolin clay • Carbon slurry • Lime mud • Oil sands |
• Phosphoric acid • Phosphoric acid |