Tobee® D3017R55 Cover Plate Liner for 4/3 DAH Rubber Lined Mining Slurry Pumps, for mining, milling, tailings, minerals processing, chemical, power plant etc.
Slurry Pump Rubber Cover Plate Liner forms a pump chamber with frame plate liner and throat bush to contact with slurries, As one of main wetted parts, Cover plate liner is very easily worn-out components because it works under longtime impact of abrasive and corrosive slurries in the high speed conditions, So the materials is very crucial to lifetime of complete pump, Tobee provides a complete rubber and metal materials selection for most all duties in mill.
Tobee® Slurry Pump Cover Plate Liner Codes:
|
Cover Plate Liner |
AH Slurry Pump |
Materials |
|
B1017 |
1.5/1B-AH |
R55, R33, R26, S42, S12, S31, S45, S51 |
|
2/1.5B-AH |
R55, R33, R26, S42, S12, S31, S45, S51 |
|
|
C2017 |
3/2C-AH |
R55, R33, R26, S42, S12, S31, S45, S51 |
|
D3017 |
4/3C-AH, 4/3D-AH |
R55, R33, R26, S42, S12, S31, S45, S51 |
|
E4018 |
6/4D-AH, 6/4E-AH |
R55, R33, R26, S42, S12, S31, S45, S51 |
|
F6018 |
8/6E-AH, 8/6F-AH, 8/6R-AH |
R55, R33, R26, S42, S12, S31, S45, S51 |
|
F8018 |
10/8F-AH |
R55, R33, R26, S42, S12, S31, S45, S51 |
|
G8018 |
10/8ST-AH |
R55, R33, R26, S42, S12, S31, S45, S51 |
|
FAM10018 |
12/10F-AH |
R55, R33, R26, S42, S12, S31, S45, S51 |
|
G10018 |
12/10ST-AH |
R55, R33, R26, S42, S12, S31, S45, S51 |
|
FAM12018 |
14/12F-AH |
R55, R33, R26, S42, S12, S31, S45, S51 |
|
G12018 |
14/12ST-AH |
R55, R33, R26, S42, S12, S31, S45, S51 |
|
H14018 |
16/14TU-AH |
R55, R33, R26, S42, S12, S31, S45, S51 |
|
U18018 |
20/18TU-AH |
R55, R33, R26, S42, S12, S31, S45, S51 |
Tobee® Slurry Pump Rubber Wear Parts:
√ Liners - Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomers. Elastomer seal rings back all liner joints.
√ Impeller - front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are complete interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
√ Throatbush - Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
Tobee® Rubber Lined Slurry Pumps Applications:
Mining & Mineral Processing
The slow running speeds of the Tobee heavy duty rubber lined slurry pump, together with the comprehensive choice of abrasion resistant alloys and elastomers, provide unrivalled performance and service life for all abrasive mining and minerals processing applications.
Sand & Gravel
Designed for easy and simple strip down and re-assembly, the Tobee heavy duty rubber lined slurry pump minimises downtime, making it the ideal choice where installed stand by pumps are not available.
Sugar Processing
The premium reliability and service life of the Tobee heavy duty rubber lined slurry pump is specified by many sugar plant engineers worldwide where uninterrupted pump operation during the sugar campaign is a critical requirement.
Flue Gas Desulphurisation
The new generation of specially formulated abrasion and corrosion resistant alloys, together with the very latest elastomer technology, positions Tobee Pumps firmly as a major supplier of pumps to the FGD industry.
Industrial Applications
Wherever abrasive solids are causing premature failure of pumps, the Tobee heavy duty rubber lined slurry pump range has the right combination of performance, wear life and reliability to bring the customer the lowest cost of ownership.
Added to subscribe successful !
