Name: Pump Parts Impeller Release Collar S239-U71542
Price: 295.00 USD

Pump Parts Impeller Release Collar S239-U71542

Product Brands: Tobee

Slurry Pump Spare Parts namely the pump parts have direct connection with slurries, They are very crucial to the service life of slurry pumps. The wetted parts include impeller, liner, throatbush, frame plate liner insert, casing etc., These parts are very easily worn-out components because they work under longtime impact of abrasive and corrosive slurries in the high speed.

Add to Favorite Items (0)

Sales: 0+

Tobee^® Slurry Pump Impeller Release Collar S239-U71542 also called Impeller Disassembly Device. The Impeller Release Collar S239 is used for 12/10ST-AH Slurry Pump, 10/8ST-AH Slurry Pump and 14/12ST-AH Slurry Pump. The basic code is 239, it allows impeller to be removed easily in large slurry pump. Slurry pump impeller release collar is located between labyrinth and shaft sleeve, it is made up of three segment. Slurry Pump Impeller Disassembly Device parts code: FAM239M, S239M, T239M...

The Main Parts for Metal and Rubber Slurry Pump Parts:

• Bearing assembly - A large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
• Liners - Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomers. Elastomer seal rings back all liner joints.
• Casing - Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety.
• Impeller - front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are complete interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
• Throatbush - Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.

Standard Materials Description:
Metal:
• KmTBCr27(Ultralloys^®) is a wear resistant white cast iron that offers excellent performance under erosive conditions. The alloy can be effectively used in a wide range of slurry types. The high wear resistance of KmTBCr27 alloy is provided by the presence of hard carbides in the microstructure. KmTBCr27 Alloy is particularly suited to mild acidic duties where erosion resistance is required.
• KmTBCr28(Extralloys^®) is martensitic white iron with moderate erosion resistance.It has the main elements of Chrome 28%, low Carbon with hardness of 430 in Brinell, KmTBCr28 is a corrosion resistant white iron suitable for low PH corrosion duties, where erosive wear is also a problem.

• KmTBCr35(Hyperalloys^®) is a premium erosion/corrosion alloy, The main elements of Chrome is 35-45%, low Carbon with hardness of 450 in Brinell. KmTBCr35 Alloy is suitable for phosphoric acid duties, FGD duties, sulphuric acid , and other moderately corrosive applications.

* SPECIAL NOTES: Ultralloys^®, Extralloys^® & Hyperalloys^® are the registered trademark of TOBEE PUMP CO.,

Rubber:

• RU08 is a black natural rubber, of low to medium hardness. RU08 is used for impellers where superior erosive resistance is required in fine particle slurries.

• RU26 is a black, soft natural rubber. RU26 is used for lines where superior erosion resistance to all other materials in fine particle slurry applications.

• RU33 is a premium grade black natural rubber of low hardness and is used for cyclone and pump liners and impellers where its superior physical properties give increased cut resistance to hard, sharp slurries.

• RU55 is premium grade black natural rubber, it is suitable for severe erosive fine particle slurries.

Polyurethane:

• PU01 is an erosion resistant material that performs well in elastomer applications where 'tramp' is a problem. This is attributed to the high tear and tensile strength of PU01. However, its general erosion resistance is inferior to that of natural rubber.

Customized Materials:

Tobee^® Pump is always making continuous optimization of materials like Cast steel, EPDM, Hypalon, Hastelloy, CD4MCu, Viton, Fluoroplastic, Ceramic, Bronze, Titanium, Aluminum and other anti-abrasive & corosive materials for various applications.

Tobee® 12/10 ST AH Slurry Pumps Applications:

The 12/10 ST AH Slurry Pumps are widely used to transport corrosive/ abrasive and high concentration slurry in many industries. Such as Gold, Silver, Iron ore, Tin, Steel, Coal, Titanium, Copper, Mineral sands, Lead and Zinc. Various other industries include Molybdenum, Electric Utilities, Oil Shale, Water & Sewage Utilities, Building areas, Sand & Gravel, Tobacco and Agriculture (hog, poultry, dairy manure), Mining & Minerals, Grinding and screening, Hydrocyclone separation, Magnetic separation, Flotation, Thickening, Filtration, Leaching, solvent extraction and electrowinning, Pelletizing, Tailings, Metallurgy, Roasting, Annealing and pickling, Coke quenching, Hot strip milling, Neutralisation, Mud handling and waste treatment.

Label: Slurry Pump Parts Slurry Pump Spare Parts Mud Pump Parts centrifugal sand pump parts acid proof slurry pump parts Gravel Pump Parts

(0 Reviews)

Write a Review

See All >