Tobee® Rubber Slurry Pump Impeller is interchangeable with Metal lined slurry pump parts, Wetted parts is namely the pump parts have direct connection with slurry, are very crucial to the service life of slurry pumps. The wet parts, include impeller, liner, throat bush, frame plate liner insert, casing, etc., are very easily worn-out components because they work under longtime impact of abrasive and corrosive slurries in the high speed. For the long service life of pump parts, the material plays an important role here..
Tobee® Slurry Pump Impeller Code:
|
PN. |
Slurry Pumps |
Slurry Pump Materials |
|
B1127 |
1.5/1B-AH |
high chrome , rubber, polyurethane, ceramic |
|
B15127 |
2/1.5B-AH |
high chrome , rubber, polyurethane, ceramic |
|
C2147 |
3/2C-AH |
high chrome , rubber, polyurethane, ceramic |
|
C2127 |
3/2C-AH |
high chrome , rubber, polyurethane, ceramic |
|
C2051 |
3/2C-AH |
high chrome , rubber, polyurethane, ceramic |
|
D3147 |
4/3C-AH, 4/3D-AH |
high chrome , rubber, polyurethane, ceramic |
|
D3145WRT1 |
4/3C-AH, 4/3D-AH |
high chrome , rubber, polyurethane, ceramic |
|
32056 |
4/3C-AH, 4/3D-AH |
high chrome , rubber, polyurethane, ceramic |
|
E4147 |
6/4D-AH, 6/4E-AH |
high chrome , rubber, polyurethane, ceramic |
|
E4056 |
6/4D-AH, 6/4E-AH |
high chrome , rubber, polyurethane, ceramic |
|
E4058 |
6/4D-AH, 6/4E-AH |
high chrome , rubber, polyurethane, ceramic |
|
F6147 |
8/6E-AH, 8/6F-AH, 8/6R-AH |
high chrome , rubber, polyurethane, ceramic |
|
F6056 |
8/6E-AH, 8/6F-AH, 8/6R-AH |
high chrome , rubber, polyurethane, ceramic
|
|
F6021 |
8/6E-AH, 8/6F-AH, 8/6R-AH |
high chrome , rubber, polyurethane, ceramic |
Tobee® Slurry Pump Rubber Wear Parts:
√ Liners - Easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure molded elastomers. Elastomer seal rings back all liner joints.
√ Impeller - front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and molded elastomer impellers are complete interchangeable. Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
√ Throatbush - Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
Tobee® Slurry Pump Rubber Parts Applications:
Tobee Slurry Pump Rubber Parts are widely used for AH/HH/L/M Horizontal slurry pumps, SPR Vertical rubber lined slurry pumps, Centrifugal horizontal slurry pumps, rubber lined slurry pumps, Chemical slurry pumps, Silica sand slurry pumps, Minerals processing slurry pumps, De-Watering Screen Pump, Ore sand pumps, Tailings Pump, Pipe-jacking slurry pumps, Ball mill discharge Pump, Tunneling slurry pumps, Mixing tank slurry Pump, Wet crushers slurry pumps, SAG mill discharge pumps, Ball mill discharge pumps, Rod mill discharge slurry pumps, Ni acid slurry pumps, Coarse sand pumps, Coarse tailings pumps, Phosphate matrix slurry pumps, Scrubber slurry Pump, Minerals concentrate pumps, Heavy media slurry pumps, Dredging Sand slurry pumps, Bottom ash slurry pumps, Fly ash pumps, Lime grinding pumps, Screen feed Pump, Oil sands pumps, Mineral Sands pumps, Fine tailings pumps, Tailings booster Pump, Thickener Tailings Pump, Process recycle Pump, Pipeline transfer pumps, Phosphoric acid slurry pumps, Coal slurry pumps, Flotation pumps.
Contact information：
Email: Sales6@tobeepump.com | Mob: +86-18033757329| Skype: Sales6_867 | Fax: +86 311-87221317
Web: www.tobeepump.com | Web: www.slurrypumpsupply.com | Web: www.tobee.cc | Web: www.hydroman.cn | Web: www.tobee.store
Added to subscribe successful !
