Analog Andritz Paper Processing Mills Pumps and Wearing Spares

Tobee manufacture replacement Andritz S series Pumps and Parts, Andritz ACP series Pumps and Parts, Andritz FP series Pumps and Parts, Andritz VP series Pumps and Parts, Andritz CP series Pumps and Parts etc.

Andritz replacement parts including: Open or Semi Impellers(2 vanes, 3 vanes, 6 vanes, 8 vanes), Pump casings, Casing cover, Front linings, Rear linings, Stuffing box body, Shaft etc, The materials can be manufactured in cast iron, SS304L, SS316L, 1.4460 Duplex stainless steel, 1.4517, 1.4517 hardened etc.

Andritz nterchangeable Paper Pulp Pumps Spares Parts Design Features:

• Impeller - Adopting full open type impeller with large channel design by precision casting, No. of vanes is 3-6 vanes,This configuration can reduce the axial force, And in the transporting, it will not generate bubbles, non-clog impeller channel,Improving the pulp concentration.
• Volute casing - Adopting single stage vortex casing, big size, Casing is designed as duoble casing structure for reducing radial force and axis deviation.
• Materials - various mateials of Wetted parts are available, Such as Cast iron,SS304,SS316L,Duplex stainless steel etc
• Shaft seal - Mechanical seals and packing seal can be used as per requested
• Severe application - Excellently suited for transporting media containing solids (e.g. for pulp, paper, or effluent applications)

Equivalent ANDRITZ centrifugal pumps designs:
Transport flow: max 6000 m³/h (standard pump)
Transport flow: max 85 m³/s (special pumps)
Transport pressure: max. 16 bar (standard pump)
 

High quality wear protection
Over 90% efficiency
Free flow pumps for substances with solids up to 140m
Construction with extremely low vibrations
Optimal behavior at partial load
Low life cycle costs

Ideal for: Chemical industry, paper and pulp industry, lye, water supply, cooling circuits, fibrous media, abrasive sludge, wastewater treatment and transport, sugar industry, power plant technology.

Andritz centrifugal pumps are used for pumping various fluids and have a very high efficiency in the work points due to the innovative manufacturing process and the materials used. The pumps are built horizontally, vertically, multi-storey and specially, embedded in concrete, for very large volumes of water.

Acid or alkaline
No solids content or high content;
Fluids neutral or aggressive / dangerous to health;
Applications:

Clean water, irrigation
Oil and gas (according to ISO5199 and ATEX protection)
Crude oil and condensate
Pulp and paper industry
Chemical industry
Water capture
Options:

According to ATEX, EN733 and ISO5199 standards
Selection of high quality materials