4/3C AH and 6/4D AH Centrifugal Sand and Slurry Pumps

Product Brands: Tobee

Tobee offers slurry pump parts for 1.5/1B-AH, 1.5/1C-HH, 2/1.5B-AH, 3/2C-AH, 4/3C-AH, 4/3D-AH, 4/3E-HH, 6/4D-AH, 6/4E-AH, 6/4F-HH, 8/6E-AH, 10/8E-M, 10/8ST-AH, 12/10ST-AH, 14/12ST-AH, 16/14TU-AH, 18/16TU-AH, 20/18TU-AH etc.

price:

$6,900.00 $6,930.00

Pump Type:

AH centrifugal pumps AHR slurry pumps

Pump Models:

4/3C AH 6/4D AH 8/6E AH

Quantity:

- + (53 available)

Add to Favorite Items (0)

Sales: 0+

Tobee® AH Centrifugal Slurry Pumps are designed for handling highly abrasive, high density slurries with excellent wear life while maintaining efficiency during the wear cycle providing the best total operating cost. The coal slurry pumps can be used in many applications, such as Coal prep, Pipeline transport, High velocity hydraulic transport, Mineral processing, Cyclone feeds, Aggregate processing, Fine primary mill grinding, Chemical slurry service, Tailings, secondary grinding, Industrial processing, Pulp and paper, Food processing, Cracking operations, Ash handling etc.

AH Slurry Pumps Design Features:
Bearing assembly - A large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame.
Liners - Common material hard metal liners are completely interchangeable with pressure molded elastomer. Elastomer seal rings back all liner joints. Easily replaceable liners are bolted, not glued, to the casing for positive attachment and east of maintenance.
Impeller - Common material hard metal and molded elastomer impellers are completely interchangeable. Front and rear shrouds have pump out vanes that reduce recirculation and seal contamination.
Throat bush - Common material hard metal and molded elastomer impellers are completely interchangeable. Wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal.
Pump casing - Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety.
One-piece frame - A very robust one-piece frame cradles the cartridge type bearing and shaft assembly. An external impeller adjustment mechanism is provided below the bearing housing for easy adjustment of impeller clearance.

Tobee® AH Slurry Pumps Performance Parameter:

Model	Max . Power	Material		Clear water performance					Impeller Vane No.
Model	Max . Power	Liner	Impeller	Capacity Q ( m3/h)	Head H ( m)	Speed n (rpm)	Eff.η (%)	NPSH (m)	Impeller Vane No.
1.5/1B-AH	15	M	M	12.6~28.8	6~68	1200~3800	40	2~4	5
1.5/1B-AH	15	RU	RU	10.8~25.2	7~52	1400~3400	35	2~4	3
1.5/1B-AHH	30	M	M	16.2~34.2	25~92	1400~2200	20	1~5.5	5
2/1.5B-AH	15	M	M	32.4~72	6~58	1200~3200	45	3.5~8	5
2/1.5B-AH	15	RU	RU	25.2~54	5.5~41	1000~2600	50	2.5~5	5
3/2C-AH	30	M	M	39.6~86.4	12~64	1300~2700	55	4~6	5
3/2C-AH	30	RU	RU	36~75.6	13~39	1300~2100	55	2~4	5
4/3C-AH	30	M	M	86.4~198	9~52	1000~2200	71	4~6	5
4/3D-AH	60	M	M	86.4~198	9~52	1000~2200	71	4~6	5
4/3C-AH	30	RU	RU	79.2~180	5~34.5	800~1800	59	3~5	5
4/3D-AH	60	RU	RU	79.2~180	5~34.5	800~1800	59	3~5	5
4/3E-AHH	120	M	M	126~252	12~97	600~1400	50	2~5	5
6/4D-AH	60	M	M	162~360	12~56	800~1550	65	5~8	5
6/4E-AH	120	M	M	162~360	12~56	800~1550	65	5~8	5
6/4D-AH	60	RU	RU	144~324	12~45	800~1350	65	3~5	5
6/4E-AH	120	RU	RU	144~324	12~45	800~1350	65	3~5	5
6/4F-AHH	260	M	M	100~414	34~98	600~1000	64	2~8	5
8/6E-AH	120	M	M	360~828	10~61	500~1140	72	2~9	5
8/6E-AH	120	RU	RU	324~720	7~49	400~1000	65	5~10	5
10/8ST-AH	560	M	M	612~1368	11~61	400~850	71	4~10	5
10/8ST-AH	560	RU	RU	540~1188	12~50	400~750	75	4~12	5
10/8E-M	120	M	M	666~1440	14~60	600~1100	73	4~10	5
10/8E-M	120	RU	RU	540~1188	10~42	500~900	79	5~9	5
12/10ST-AH	560	M	M	936~1980	7~68	300~800	82	6	5
12/10ST-AH	560	M	M	720~1620	7~45	300~650	80	2.5~7.5	5
14/12ST-AH	560	M	M	1260~2772	13~63	300~600	77	3~10	5
14/12ST-AH	560	RU	RU	1152~2520	13~44	300~500	79	3~8
16/14ST-AH	560	M	M	1368~3060	11~63	250~550	79	4~10	5
16/14TU-AH	1200	M	M	1368~3060	11~63	250~550	79	4~10	5
18/16ST-AH	560	M	M	2160~5040	8~66	200~500	80	4.5~9	5
18/16TU-AH	1200	M	M	2160~5040	8~66	200~500	80	4.5~9	5
20/18TU-AH	1200	M	M	2520~5400	13~57	200~400	85	5~10	5

Label: AH mining slurry pumps 4x3C AH slurry pumps 6x4 AH centrifugal pumps slurry pumps spares 8/6E AH pumps and parts

(0 Reviews)

Write a Review

See All >