G10145WRT1A05 Impeller is used for 12/10 ST AH Slurry Pump, compared with the standard slurry pump impeller, WRT slurry pump impeller is more wear-resisting. The WRT1 impeller and WRT1 Slurry Pump Throa tbush combination designed to enhance efficiency and improve wear performance.
Key Benefits for WRT Slurry Pump Wetted Parts
• Increased wear life – the WRT slurry pump impeller and throatbush combination is designed to increase wear life between 30% and 50%
• Power savings – lower pump power consumption
• Cost reduction – higher pump efficiency sustained over a longer pumping operation time
• Retrofit – new design parts retrofit to your current AH slurry pumps
• Lower NPSH requirements – results in enhanced hydraulic performance and extended wear life
• Material combinations – rubber or metal part combinations available
12/10ST-AH Slurry Pump Parts List:
No. |
Pump Parts Name |
Pump Model |
Pump Parts Code |
Matl. Code |
Unit Weight |
1 |
Impeller Release Collar |
12/10ST-AH |
S239M |
C21 |
8.2 |
2 |
Shaft Sleeve |
12/10ST-AH |
SH076 |
C21 |
45.2 |
3 |
Shaft Sleeve |
12/10ST-AH |
C21 |
34 |
|
4 |
Stuffing Box |
12/10ST-AH |
G078 |
A05A |
121.5 |
5 |
Expeller |
12/10ST-AH |
SH028 |
A05A |
41.7 |
6 |
Expeller Ring |
12/10ST-AH |
G029 |
A05A |
109 |
7 |
Pump Base |
12/10ST-AH |
ST003M |
G01 |
908 |
8 |
Water Seal Ring |
12/10ST-AH |
G063 |
C23 |
4.97 |
9 |
12/10ST-AH |
G118 |
C23 |
9.93 |
|
10 |
Neck Ring |
12/10ST-AH |
G067 |
C23 |
3.6 |
11 |
Gland Assembly |
12/10ST-AH |
G044 |
G01 |
12.5 |
12 |
Shaft O-Ring |
12/10ST-AH |
CSC210 |
S12 |
|
13 |
Expeller Ring / |
12/10ST-AH |
G122 |
S12 |
|
14 |
End Cover Seal |
12/10ST-AH |
S025 |
S42 |
|
15 |
Frame Plate |
12/10ST-AH |
G10032 |
D21 |
800 |
16 |
Cover Plate |
12/10ST-AH |
G10013 |
D21 |
770 |
17 |
Impeller |
12/10ST-AH |
G10147 |
A05A |
490 |
18 |
Volute Liner |
12/10ST-AH |
G10110 |
A05A |
611 |
19 |
Throath bush |
12/10ST-AH |
G10083 |
A05A |
250 |
20 |
Frame Plate Liner Insert |
12/10ST-AH |
G10041 |
A05A |
221.5 |
21 |
Grease Cup Adaptor |
12/10ST-AH |
G138 |
Alloy 20 |
0.42 |
22 |
Stuffing Box |
12/10ST-AH |
G078JM |
D21 |
121.5 |
23 |
Volute Lifting Beam |
12/10ST-AH |
G10304 |
Alloy 20 |
51 |
24 |
Cover Plate Bolt |
12/10ST-AH |
G10015M |
E62 |
9.49 |
25 |
Lip Seal |
12/10ST-AH |
G090 |
S12 |
|
26 |
Shaft O-Ring |
12/10ST-AH |
G109 |
S12 |
|
27 |
Shaft O-Ring |
12/10ST-AH |
T109 |
S12 |
|
28 |
Intake Joint |
12/10ST-AH |
G10060 |
Rubber |
|
29 |
Discharge Joint Ring |
12/10ST-AH |
G103132XLP |
Rubber |
|
30 |
Volute Liner Seal |
12/10ST-AH |
G10124 |
Rubber |
|
31 |
Bearing Body |
12/10ST-AH |
S004M |
G01 |
151.5 |
32 |
End Cover |
12/10ST-AH |
S024 |
D21 |
17.5 |
33 |
Labyrinth |
12/10ST-AH |
S062 |
G01 |
9.6 |
34 |
Labyrinth (Driver) |
12/10ST-AH |
S062DM |
G01 |
14.5 |
35 |
Shaft |
12/10ST-AH |
SH073M |
E05 |
242.6 |
38 |
Clamp Washer |
12/10ST-AH |
F011 |
E62 |
1.4 |
39 |
Adjusting Screw |
12/10ST-AH |
M30X345 |
E62 |
3.44 |