Tobee THR4/3C Rubber Liners Slurry Pump and spare parts are 100% same and interchangeable with 4/3C-AHR Rubber Lined Slurry Pump and spare parts.
4/3C Rubber lined Slurry Pump is widely used for transporting slurry with strong corrosion and high concentration for many industries such as metallurgy, mine, coal, electric power, building materials etc. The wet parts is 100% interchangeable with 4/3C-AH metal lined slurry pump.
4/3C Slurry Pump Design Features:
√ Bearing assembly: large diameter shaft with short overhang contributes to long bearing life.
√ Liners: Easily replaceable liners are bolted, not glued to the casing for positive maintenance.
√ Casing: Casing halves of cast or ductile iron provide high operating pressure capabilities.
√ Impeller: Front and rear shrouds have pump out vanes that reduce recirculation and seal contamination.
√ Throatbush: Wear is reduced and maintenance simplified by the use of tapered.
Tobee® Rubber Lined Slurry Pumps Applications:
Rubber lined slurry pumps are widely used for wet crushers, SAG mill discharge, ball mill discharge, rod mill discharge, Ni acid slurry, coarse sand, coarse tailings, phosphate matrix, minerals concentrate, heavy media, dredging, bottom/fly ash, lime grinding, oil sands, mineral sands, fine tailings, phosphoric acid, coal, flotation, sugar beets, process chemical, pulp and paper, FGD, waste water etc.
Tobee® 4/3 AHR Rubber Lined Slurry Pump Performance Parameters:
|
Model |
Max. Power (kw) |
Materials |
Clear water performance |
Impeller Vane No. |
|||||
|
Liner |
Impeller |
Capacity Q (m3/h) |
Head H (m) |
Speed n (rpm) |
Eff. η (%) |
NPSH (m) |
|||
|
4/3C-AHR |
30 |
Rubber |
Rubber |
79.2-180 |
5-34.5 |
800-1800 |
59 |
3-5 |
5 |
Added to subscribe successful !
