Tobee® AH10x8 Gypsum Slurry Pump is the heavy duty pump for handling corrosive and abrasive slurries. It is mainly used for transporting Solid-liquids mixture with solid suspending (like gypsum, lime, limestone, ore, sand, gravel, ash etc.) or strongly abrasive and corrosive slurriesw with high concentration slurry. The 10x8 Gypsum slurry pump are used perfect impeller structure ensure satisfactory performance with long life and needs minimum maintenance requirements.
Design Features:
• The Large diameter, slow turning, high efficiency impellers designed to achieve maximum wear life and lowest maintenance
• The Large, open internal passages designed to reduce internal velocities, maximize wear life and lowest maintenance
• Heavy duty construction with through-bolt design provides ease of maintenance and Min downtime
• The Replaceable and Interchangeable Wet End Parts are lower the stocking cost, easy to repair and Min downtime
• The Ductile iron fully lined casing provides durability,strength, safety, and long service life recommended while the Grey iron liner is the economic solution could satisfied the most customers required especially when you dont need the pumps work at 24x7
• Minimal shaft/impeller overhang reduces shaft deflection and increases packing life and the mean time between failures
• Cartridge-style bearing assembly allows for maintenance in a clean environment without removal of the pump, resulting in reliable operation and prolonged bearing life, which is another way to increase the mean time between failures
• Grease or oil lubrication bearing assembly options offer ease of maintenance and reduced downtime
• Lower NPSH requirements results in enhanced hydraulic performance and extended the wear life
• The metal or rubber parts are available for different work conditions Max the wear life and lowest the maintenance cost
Tobee® AH10x8 Gypsum Slurry Pump Performance Parameters:
| Model | Max.Power (kw) |
Materials | Clear water performance | Impeller | |||||
| Liner | Impeller | Capacity Q | Head H | Speed n | Eff. η | NPSH | Vane No. | ||
| (m3/h) | (m) | (rpm) | (%) | (m) | |||||
| TH10x8ST | 560 | M | M | 612~1368 | 11~61 | 400~850 | 71 | 4~10 | 5 |
| RU | RU | 540~1188 | 12~50 | 400~750 | 75 | 4~12 | |||
| TM10x8E | 120 | M | M | 666~1440 | 14~60 | 600~1100 | 73 | 4~10 | 5 |
| RU | RU | 540~1188 | 10~42 | 500~900 | 79 | 5~9 | 5 | ||
Slurry Pumps Seal Arrangement:
• Packing Seal is a general shaft seal for slurry pumps. It applys to various pumping conditions, PTFE and Graphite materials of Packing can be used in high corrosive slurries or high temperature conditions.Using ceramic shaft sleeve, For high abrasion conditions, The ceramic shaft sleeve is available.
• Expeller Seal is an impeller force of reversed centrifugal force, preventing slurry leakage. Slurry pump expeller seal can be used on the single-stage pump when the positive pressure of pump inlet is no more than 10% of pump outlet pressure or on the first-stage pump in the pump series.
• Mechanical Seal is advanced sealing technique without sealing leakage, The advantages are integrating construction, convenient installation & replacement, The design of mechanical seal and seal box is suitable for liquid flow condition, So it has high abrasion and vibration resistance, pump mechanical seal can be used in various severe conditions.
Contact Us:
Email: Sales3@tobeepump.com
Mob: +86-18000656103
Skype: Tobee.Pump
Fax: +86 311-87221317
Added to subscribe successful !
